Certified Application of NO-BURN® Plus
Intumescent Fireproofing Solution for Commercial and Residential Applications
**Alternate to Sprinklers in Attic and Concealed Spaces per NFPA 13**
NO-BURN® Plus can be used on Foam Insulation, Drywall, Wood, CPVC Piping and many other commercial applications to achieve Building and Fire Code requirements.
NO-BURN® Plus Applications:
- Foam Insulation
- Drywall
- Wood
- Fiberglass
- Plastic
- Metal
- Brick
- Plaster
- Aluminum
- Assemblies or Separations
- Concealed Wood Blocking
- Engineered Wood I-Joists
- Exterior Walls
- Exterior Wood Decking and Fencing
- Façade Refinishing
- Floor and Roof Truss Systems including Plywood Sheathing(OSB)
- Glulam Laminated Beams and Headers
- Interior Walls
- Interior Architectural Woodwork
- Interior Carpentry or Finished Carpentry and Paneling
- Structural Insulated Panels (SIPs)
- Structural Rough Carpentry
NOTE: NO-BURN® Plus is not a paint. It will not hide stains or rust. It can be used as a primer and then top coated with an approved paint finish.
NO-BURN® Plus Classifications: (reports click here)
- ICC ES Report 1838
- ASTM E-1623 ICAL
- ASTM D5590-94
- CLASS A
- Green Product Status
- ASTM E84-05
- Flame Spread = 0
- UL 723
- Smoke Developed = 15
- NFPA 255, 286, 701
- Neutral PH – Non-Corrosive
- UBC 8-1 (42-1)
- Non-Toxic and Non-Carcinogenic
NO-BURN® Plus Benefits:
- Alternative to sprinklers in concealed spaces, i.e. attics and walkways per the NFPA 13 report
- Is also offered with a mold inhibitor NO-BURN® Plus Mih
NO-BURN® Plus Outdoor:
The NO-BURN® PLUS SYSTEM FOR OUTDOOR USE was specifically developed in response to recent wildfire problems in the United States, as well as the prevalence of wooden structures in close proximity in neighborhoods across the US and around the world.
NO-BURN® PLUS SYSTEM FOR OUTDOOR USE is a green, eco-friendly paint that has low VOCs (Volatile Organic Compounds). It is non-toxic, non-carcinogenic and environmentally friendly.
USES: For exterior OSB, various wood substrates and other surfaces under aluminum siding, brick veneer, or other protective covering.
The NO-BURN® PLUS SYSTEM FOR OUTDOOR USE consists of the application of a single coat of NO-BURN PLUS® painted on exterior surfaces, then sealed with a top coat of a high quality latex-based exterior paint. The treated area will then be covered by an additional protective outer layer, such as aluminum siding, brick veneer, or other exterior covering material.
Warranty for No-Burn® Products is conditional based upon proper application and installation. Installation of products must meet the conditions of being applied by a certified No-Burn® Dealer and include an FRCR Rating if and when applicable.
